PX-4 Series (for PX-4V-220 Click Here)

PX4CS.jpg (6446 bytes)  PX4G.jpg (6170 bytes) PX4S.jpg (5607 bytes)
PX-4P-2 (Click Here)

PX-4G-5

(Some models have been superseded by the PX-4V-220)

PX-4 JM (Click Here)

(Formerly PX-4S)

Click Here to check our Industrial Alternators                                Contact Us

    
PX-4V-210 Alternator             PX-4PM-210 Alternator
200/170 Amps, Model PX-4G-5 Tested & Proven
12 Volts Amps:
Rotor RPM Cold Hot
1800 70 60
2000 95 80
2250 115 95
2500 135 115
2750 145 120
3000 155 130
3500 170 140
4000 175 145
4500 180 150
5000 185 155
5500 190 160
6000 200 170

PX-4000 Regulator

The PX-4000 is used with most PX-4V-210 models. The

PX-5000 Voltage Regulator is used with the PX-4G-5.

210/170 Amps, PX-4JM/PM/P2-210 Models-
Tested & Proven
12 Volts Amps:
Rotor RPM Cold Hot
1800 60 50
2000 90 75
2250 115 95
2500 135 110
2750 150 125
3000 165 135
3500 185 150
4000 190 155
4500 195 160
5000 200 165
5500 210 175
6000 215 180

 

PX-4V-210 Series Special Features:

  • 5/16" battery post.

  • Heavy duty hand wound high output stator.

  • Heavy duty long life brushes.

  • Heavy duty rotors are each balanced by PennTex.

  • Heavy duty bearings with high temperature seals and grease.

  • Fifteen (15) press fit 60 amp diodes.

  • Specially designed heavy duty regulator that produces higher output ratings; runs cooler than current industry standards.

  • Regulator has ground fault and high voltage protection.

  • GXL wire is standard on all harnesses.

  • Standard OEM mounting in most applications.

  • 24-Volt/ 120-Amp models are available.

  • Weight: approximately 18 lbs.

 

PX-4G-5 Special Features:

  • 5/16" ground & battery post.

  • Heavy duty hand wound high output stator.

  • Heavy duty long life  brushes.

  • Heavy duty rotor balanced at PennTex Plant.

  • Heavy duty bearings with high temperature seals and grease.

  • Twelve (12) press fit 60 amp diodes.

  • Heat sinks designed for efficient cooling.

  • Specially designed patented heavy duty regulator which produces higher output ratings; runs cooler than industry standards.

  • Regulator has ground fault protection and high voltage protection.

  • GXL wire is standard in all harnesses.

  • Standard OEM belt can be used in most applications.

  • Standard OEM mounting - no brackets needed in most applications.

  • Weight: approximately 20 lbs.

To figure out the alternator rotor RPM on your vehicle click HERE.

Alternator Dimensional Drawings
Alternator Application Guide
2015 PennTex Industries, Inc. All Rights Reserved